MIX 04 (694 444 64)
Kendrion Kuhnke Automation GmbH
118
17 May 2021
Module configuration
The configuration of the analogue inputs and outputs as well as the counter/encoder interfaces is done via
pluggable modules that are inserted into the corresponding slots. One slot corresponds to one analogue
channel or one counter/encoder interface. Only suitable modules can be plugged into the selected slot. This
procedure is based on the "EtherCAT Modular Device Profile".
Information
All slots must be equipped with a module.
View CODESYS- device tree
TwinCAT2 Slot- configuration