Kendrion Kuhnke Automation GmbH
Construction and Functionality
Econo
38
5 Installation and Operation
Information
Before installing, servicing or putting Econo into operation, please also read the safety
information in the preface of this document.
5.1 Mechanical Installation
5.1.1 Installation
Econo is a modern electronic assembly. Handle - specifically mount, operate and service - with care.
Econo is designed for switching cabinet installation. However, you can also choose to install the unit on any
other even surface using the flange fitting. Please take note of the admissible ambient conditions during
storage and operation as summarised in the Technical Data tables.
Information
Please note:
The unit is solely permitted for use in fully enclosed control cubicles or rooms.
Take heed of the applicable DIN/VDE regulations or their national equivalents when installing the
unit in a switching cabinet.
Fitting with screws (book mounting)
Drill holes into the mounting surface as shown on the illustration.
Turn all but approx. 5 mm of the screws into the holes drilled
into the mounting surface.
Put on the device and push down.
Turn in the screws until tight.
Information
Please remember that the plate and screws must not only be able to sustain the weight of the
device but also that of the cables.
The second SD card slot is located on the back of the unit. Before fully installing it, check
whether a storage medium will have to be inserted.
Other mounting options
You may also attach the unit to a DIN rail or mount it flat down on a wall. Check back with Product
Management in the main factory if you wish to do so.
