www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
2
INSTALLATION INSTRUCTIONS
LTS1830_F-5473_091118
6. Place latch brackets over wireway. (2) are provided for each fixture.
7. Connect socket to fixture receptacle and push wiring back into wireway. See Figure 2.
Figure 2
8. Raise fixture positioned so wireway tube passes through the hole in the cover.
9. Secure using rotary latches on latch brackets. See Figure 3.
Figure 3
10. Repeat for the other fixture. See Figure 4. Add additional support straps and brackets provided positioned
approximately every 12"-14".
Figure 4
For two fixtures
For single fixture
For two fixtures
