KEN DW 412
Section/page:6.1
Subject to alterations
17/9/2013
Program built-up
Wash programs
KEN DW410 has 4 programs.
A program consists of:
The programs can be adjusted individually, see section 3.2 - Technical data.
Adjustment of the programs requires specially trained staff and can only be
carried out by knowledge of the special codes required.
These codes are handed out in connection with courses at
KEN
.
KEN’s dishwasher’s are adjustet from the factory to wash at 57°C and rinse
at 80°C. If the right temperature has not been reached, the program will be
terminated and a warning is shown on the display.
Wash pressure
KEN DW412 has 2 wash pressures:
- high pressure used
for pots and pans.
- low pressure applied to glass, cups and other service.
Wash pressure’s can be set individually for each program and there is a
opportunity to select programs with high pressure, low pressure or high/low
pressure.
Low pressure:
The program can only be startet with low washing pressure.
The display shows “L”.
High pressure
The program can only be startet with high washing pressure.
The display shows “H”.
High/low wash pressure:
Both wash pressure can be selected for the program, the display shows
“ L/H”.
For high pressure press down the start button until the hood starts to go
down - the display change to “H”. For low pressure press down shortly on
the start button - the display change to “L”.
Low/high wash pressure:
Both wash pressure can be selected for the program, the display shows
“ L/H”.
For high pressure press down the start button until the hood starts to go
down - the display change to “H”. For low pressure press down shortly on
the start button - the display change to “L”.
Wash incl. detergent dosage
Pause
Rinse
Pause
Opening
Enclosed a start key which
can be placed on the wall
under a table og similar.
Summary of Contents for 59.480
Page 2: ......
Page 33: ......
Page 40: ...KEN DW 412 Section page 17 1 Subject to alterations 17 9 2013 Diagrams ...
