SuperSnake GTX
Operating manual - EN
4.
At the subfeeder end, push the wire liner into the cable with the liner sleeve. Secure the wire liner installation by
tightening the sleeve.
5.
At the wire feeder end, cut the excess wire liner by using the liner sleeve as measure.
Cut the excess of the steel spiral liner with side cutting pliers and the excess of the Chili liner with a carpet knife.
6.
Insert the cone and liner sleeve on the wire liner at the wire feeder end.
Use the wire liner specific accessories delivered with the new wire liner.
© Kemppi
28
1921930 / 2144