SuperSnake GTX
Operating manual - EN
3.1 Wire liner replacement
The wire liner is a consumable part, which needs to be changed if worn and when the filler wire material changes. This
instruction covers the SuperSnake GTX subfeeder's wire liner replacement. For your welding gun's wire liner replace-
ment, refer to the welding gun operating manual.
If you change the filler wire to a different diameter or material, change also the feed rolls and feed roll accessories
accordingly.
The filler wire must be removed from the subfeeder system before the wire liner replacement.
Tools needed:
Remove old liner:
1.
Disconnect the cables from the subfeeder and from the wire feeder.
2.
Fully straighten the cable pack and ensure that the cable is not twisted.
3.
Remove the liner sleeve along with the sealing ring and cone at both ends of the subfeeder cable.
© Kemppi
26
1921930 / 2144