KEMPER ProfiMaster Instruction Manual -
EN
Product number: 150 2464
- 42 -
rev.:
2
Technical changes and errors reserved.
Status as of: 05/2015
2.3 Signs and labels required to be installed by the operator
The operator is required to attach other potential signs and labels to the ProfiMaster
device or in its proximity.
These signs and labels, may - for example - be related to regulations on the use of
personal protective equipment.
2.4 Safety instructions for the operating personnel
Before using the ProfiMaster device the user must be informed about handling the
device and materials and tools via information, instruction and training.
The ProfiMaster device may only be used in perfect condition, in accordance with its
purpose of use, subject to the safety requirements and taking account of all hazards
and this manual! Any malfunctions, especially those that may jeopardize safety, must
be rectified immediately!
Any person responsible for commissioning, operation or maintenance of the device
must be made thoroughly familiar with this instruction manual and must understand
its contents - in particular the paragraph 2 Sicherheit. During the operation it is too
late.
It applies especially to personnel who work with the ProfiMaster device only
occasionally.
The Instruction manual must always be at hand near to the ProfiMaster device.
We are not liable for any damages and accidents caused by the failure to comply
with this manual.
Observe the accident prevention regulations, as well as other standard occupational
and health safety rules.
Competences regarding various aspects of maintenance and repairs must be clearly
defined and adhered to. This is the only way to avoid failures – especially in
dangerous situations.
The operator shall ensure that the service and maintenance personnel use personal
protective equipment. This includes safety footwear, protective glasses and gloves.
The personnel must not have long loose hair, loose clothing or wear jewellery! In
principle, your hair may get caught by the device or hit and pulled in by moving parts
of the instrument!
In the case of safety-related changes to the ProfiMaster device stop immediately and
secure the exhaustion and report the event to the appropriate working place/person!
Work on the ProfiMaster device may only be carried out by reliable and trained staff.
Observe the legally permitted minimum age limit!
Trainees, apprentices or other staff being trained or instructed may handle the
ProfiMaster device only under constant supervision of an experienced person!
Connection of the welding power supply (UVV VBG / Occupational accident
prevention regulations / 15, section 43, paragraph 1) must be made so that the
protective conductor of the ProfiMaster device is not energized by a faulty welding
