- 3 -
Function
The KHS Service-Handy communicates through an infrared interface with the hygienic flushing control. It must
be aimed at the sensor at a distance of 10 - 30 cm to be able to make adjustments. Do not swing the KHS-
Service-Handy away from the target while operating. It could erroneously trigger an unwanted control
command.
Controls
1 Switching on/ Switching off
2 Screen, menu display, menu items, etc.
3 Left/Right, moves within a selection
4 Acknowledge a selection/input
5 Navigation, moves to the begriming/ end of the menu list
6 Navigation, moves up/down one menu point
7 Navigation, moves up/down one page (4 menu items)
8 Exit a menu item
9 Starts the save menu
10 Write; writes the saved settings to a control
11 Reset
12 F1, no function
13 Write values, 0 - 9
14 Hash key, no function
15 Delete; deletes one character in the input line each time it is pressed
Menu item for navigation
Menu item
Description
- Commands
Goes to the first menu item, "Command"
- Program
Goes to the first menu item, "Program"
- Parameters
Goes to the first menu item, "Parameter"
- Counter
Goes to the first menu item, "Counter"
- Information
Goes to the first menu item, "Device info"
Screen standby mode
List of menu items
Only specialists are allowed to set the functions described here.
The menu items listed here can be individually set with the KHS Service-Handy. The numbers and terms in the
"Menu Item" column correspond to the display on the KHS Service-Handy screen. The LED signals in the
control sensor transmits the values.
For hygienic flushings, see "Hygienic Flushings" list
The screen darkens if no key is pressed for 2 minutes.
Pressing any key cancels this mode.
