Manual KHS Mini System Control MASTER
30
Configuration of -SLAVE- 1.1 (safeguard)
The KHS Mini System Control -SLAVE- 1.1 in this sample project is planned as a
safeguard SLAVE. The safeguard is always activated using a water sensor. When a line is
selected with the "Release" program, the times can be defined. This valve is open only in
times-of-use. A starting and stopping time need to be defined for the release.
Furthermore, the desired weekday can be selected through a dropdown list. Illustration
8.34 shows the configuration of the "Safeguard" operating mode. If no operating mode is
configured, the safety valve is open the whole day and only reacts to a signal from the
water sensor.
Ill. 8.34 Configuration of a safeguard
Configuration of a -SLAVE- 1.2 (volume flushing)
The KHS Mini System Control -SLAVE- 1.2 in the sample project are each linked to a
volume flow sensor. To control the volume-dependent water exchange, the "Volume"
program needs to be selected. For the "Volume" program, set the starting time, the
flushing volume and the maximum flushing time. Furthermore, the desired weekday can
be selected through a dropdown list for both programs. Illustration 8.35 shows the
configuration of the "Volume flushing" operating mode
Illustration 8.35 shows the configuration of the "Temperature flushing" operating mode.
Volume flushing
Ill. 8.35 Configuration of volume flushing
01
02
03
04
