32
EN
KSB-100
IMPORTANT SAFETY INSTRUCTIONS
13. Do not use the device outdoors.
14. Do not leave the cable on the side of the object. Keep it away from hot surfaces.
15. Do not keep the device near hot gas or electrical cookers, or in a hot oven.
16. Only use the device for its intended purpose. It is only intended for use in domestic
conditions.
17. Only connect the device to a power source with the appropriate voltage. Always keep the
plug clean.
18. Do not fill the container beyond its stated capacity. The maximum capacity is marked on
the container.
19. Plug the device into its own socket, separate from other devices. Always connect the
power plug firmly to the socket. Do not insert the plug with wet hands. Be careful when
handling the power cord. When pulling out the power cord, hold the plug.
20. Always begin blending with lid firmly in place. Do not operate blender with the lid
removed.
21. Do not use the device near open ames or wet areas.
22. Only use the device on stable and heat-proof surfaces.
23. Take o
ff
all foreign objects before using the device.
24. Any user who has not completely read and understood the usage and safety precautions
contained in this manual may neither operate nor clean this device.
25. Use the appropriate lid and blade attachment for your container. The lids and blade
attachments that match the di
ff
erent container shapes, types and sizes are interchangeable.
26. Use caution when mixing hot liquids or ingredients. Splashes or escaping steam can
cause scalds and burns. Do not fill the container to its maximum capacity.
Keep hands and other exposed body parts away from the lid opening to avoid possible
burns.
27. Never touch moving parts.
Turn o
ff
the power and wait for the blades to stop before removing the container from the
motor base and opening the container.
28. Switch o
ff
the device and disconnect it from the power supply before changing
accessories or working near parts that move during use.
29. Do not store any foreign objects, e.g. B. spoons, forks, knives or the cap in the container.
If there is a foreign object in the blender when it is switched on, it can damage the device and
cause injury.
