Parts and Service
Replacement parts can be obtained through your local Kodiak engine dealer.
Kodiak dealers are equipped to perform major and minor repairs. They are anxious to see that
all of your maintenance and service needs are quickly and courteously completed. Please
contact KEM Equipment Inc./Kodiak Marine regarding any favorable or un-favorable
experiences with our service dealers.
The engine model number and serial number will be required when seeking information and/or
ordering parts. There is a list of service dealers located at the very end of this manual.
Technical support for Kodiak Marine engines can be obtained by contacting KEM
Equipment Inc.
Service Literature
By contacting our Parts Department you can purchase parts and service manuals for Kodiak
Marine engines.
503-692-5012
WARNING:
The bilge can accumulate explosive fumes. The bilge blower will
evacuate the fumes. The bilge blower must be run for a minimum of 10 minutes prior to
cranking the engine.
WARNING:
Do not start or run the engine in a closed or poorly ventilated area
where exhaust gases may accumulate. All internal combustion engines give off various
fumes and gases while running. Avoid breathing these gases as they may contain
poisonous carbon monoxide and other gases, which can endanger your health or life if
inhaled steadily for a few minutes.
CAUTION
:
If the engine stalls or falters during starting, wait 3 to 4 seconds
before reengaging the starter. This will prevent possible damage to the starter or the
engine. Do NOT operate the starter for periods longer than 5-8 seconds at a time. An
interval of at least 1 minute should be observed between cranking periods to protect
the starter from overheating.
13
Summary of Contents for KODIAK MARINE
Page 2: ...2 ...
Page 11: ...Component Identification 11 ...
