Kelvinator KGC20BNA, Installation Manual

Page: 2 / 24

2 contents Kelvinator Gas Continuous Flow hot water system
Congratulations and thank you for choosing our gas
continuous flow hot water system. We are sure you will find
your new hot water system a pleasure to use. Before you
install the hot water system, we recommend that you read
through the entire installation manual, which provides the
description of the hot water system, its functions and how to
install it correctly. To avoid the risks that are always present
when you use an appliance, it is important that the hot water
system is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards.
After unpacking the hot water system please check it is not
damaged. If in doubt, do not use the hot water system but
contact your local Electrolux Customer Care Centre using the
number located at the back of this installation guide.
NOTE: The actual gas heating appliance that is part of this
gas continuous flow hot water system will here after be
refered to as "water heater" for the purposes of this manual.
The gas continuous flow hot water system as a whole may
also be refered to as "hot water system" for simplicity.
environmental tips
Information on disposal for users
• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
• If you wish to discard this gas continuous hot water
system, please contact your local authorities and ask for
the correct method of disposal.
caution
• The hot water system is not intended for use by young
children or infirm persons without supervision.
• Children should be supervised to ensure that they do
not play with the hot water system.
• Contact an authorised installer for installation of this hot
water system.
• Contact an authorised service technician for repair or
maintenance of this hot water system.
• If the power cord is to be replaced, replacement work
must be performed by authorised personnel only.
• Installation work must be performed in accordance
with national standards by authorised personnel only.
Wrong connection can cause over heating or fire.
• This hot water system should be installed in accordance
with AS/NZS 3000 and your electricity suppliers rules.
• The installation of this hot water system must comply
with the standards set in AS/NZS 3500.4 - Hot Water
Supply Systems.
Conditions of use
This hot water system is intended to be used in household
and similar applications such as :
• staff kitchen areas in shops, offices and other working
environments.
• farm houses.
• by clients in hotels, motels and other residential type
environments.
• bed and breakfast type environments
Important .......................................................................... 3
Important safety instructions ........................................... 4
For the plumber ................................................................ 5
Dimensions and connection points ................................... 6
Installation ......................................................................... 8
Clearances ......................................................................... 9
Gas connection ................................................................ 10
Water connection ............................................................ 11
Electrical connection ....................................................... 12
Remote controller .......................................................... 13
Remote controller Installation ........................................ 14
Commissioning Instructions ............................................ 16
Troubleshooting .............................................................. 18
PCB error codes .............................................................. 19
Warranty .......................................................................... 23
Congratulations Contents