![background image](http://html.mh-extra.com/html/kelvinator/kgc20bla/kgc20bla_installation-manual_662663003.webp)
This Installation Manual has been prepared for the installers
of the gas continuous flow hot water system.
Meanings of symbols used in this manual are shown below:
warning
This symbol indicates information concerning your
personal safety
caution
This symbol indicates information on how to avoid
damaging the gas continuous flow hot water system.
tips & information
This symbol indicates tips and information about
use of the gas continuous flow hot water system.
environmental tips
This symbol indicates tips and information about
economical and ecological use of the gas continuous flow
hot water system.
For the installer
The installation must be completed in accordance with the
information supplied in this Installation Manual.
All other relevant National, State or Local regulations must
also be conformed with and these include (but are not
limited to):
• Australian Standard AS3500.1 – Water Supply
• Australian Standard AS3500.4 – Hot Water Supply
• Australian Standard AS3000 – Electrical Installation
• Australian Gas Association Code AS5601 –
Gas Appliance Installation
• Local Water, Gas & Electrical Authority Regulations
Municipal Building Codes
warning
Installation must be performed by a qualified installer (for
example, a licensed plumber or gas fitter).
warning
This gas continuous flow hot water system is not intended
for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience or knowledge, unless they have been given
supervision or instruction concerning use by a person
responsible for their safety. Children should be supervised
to ensure that they do not play with the gas continuous flow
hot water system.
This symbol indicates never to do this
This symbol indicates always do this
warning
Connect with power properly.
Otherwise, it may cause electric shock or fire due to
excess heat generation.
Always ensure effective earthing.
No earthing may cause electric shock.
Disconnect the power and turn off the gas inlet
valve to the water heater if strange sounds, smell, or
smoke comes from it.
It may cause fire and electric shock.
Do not operate or stop the water heater by switching
on or off the power.
It may cause electric shock or fire due to heat generation.
Do not damage or use an unspecified power cord.
It may cause electric shock or fire.
If the power cord is damaged, it must be replaced by
the manufacturer or an authorised service centre or a
similarly qualified person in order to avoid a hazard.
Do not modify power cord length or share the outlet
with other appliances.
It may cause electric shock or fire due to heat generation.
Do not operate with wet hands or in damp environment.
It may cause electric shock.
Do not allow water to run into electric parts.
It may cause failure of machine or electric shock.
Do not use the socket if it is loose or damaged.
It may cause fire and electric shock.
Do not open the water heater during operation.
It may cause electric shock.
Do not allow the power cord to rest close to hot
surfaces.
It may cause fire and electric shock.
Do not disassemble or modify the water heater.
It may cause failure and electric shock.
Important
Kelvinator Gas Continuous Flow hot water system
important notes 3
Summary of Contents for KGC20BLA
Page 1: ...Gas Continuous Flow Hot Water System Installation Manual ...
Page 20: ...20 notes Kelvinator Gas Continuous Flow hot water system Notes ...
Page 21: ...Kelvinator Gas Continuous Flow hot water system notes 21 Notes ...
Page 22: ...22 notes Kelvinator Gas Continuous Flow hot water system Notes ...