4
Signal Words
A signal word -
DANGER
,
WARNING
, or
CAUTION
, is used with the safety alert
symbol.
When you see this symbol on your machine or in this manual, be alert to
instructions involving your personal safety and the safety of others.
Failure to follow these instructions can result in injury or death.
DANGER
- Indicates an immediate hazardous situation that, if not
avoided, will result in
DEATH OR SERIOUS INJURY
.
WARNING
- Indicates a potentially hazardous situation that, if not
avoided, could result in
DEATH OR SERIOUS INJURY.
CAUTION
- Indicates a potentially hazardous situation that, if not
avoided, may result in a
MINOR OR MODERATE INJURY.
Carefully read all safety points in this manual and on your machine. Keep all
safety decals in good condition and replace ones that have been worn or lost.
Replacement decals are available by contacting your local dealer.
Safety guidelines
• This equipment is dangerous to children and persons unfamiliar with its
operation.
• Do not allow persons to operate or assemble this unit until they have read this
manual and have developed a thorough understanding of the safety precautions.
• Do not attempt to operate this equipment under the influence of drugs or
alcohol.
• Review the safety instructions with all users annually.
ATTENTION
BE ALERT
YOUR SAFETY IS INVOLVED
Watch for this symbol. It identifies potential
hazards to health or personal safety.
CAUTION
Summary of Contents for CL1
