Kelly CL1, Operating Instructions Manual

Page: 41 / 46

41
Operating speeds
Operating speeds for normal conditions
Chain type Speed
Prickle Chain 10-16 km
Disc Chain 10-12 km
Transport / towing on roads < 25 km
Tyre pressure
Tyre size Ply KPA Bar
11.5/80/15.3 14 250 2.5
Disc chain lengths and quantities
Model Length W36 CL1 R300 SD49 CL2
CL1’s per CL2 chain Prickle Chain
6m
Front right
4.53m 27 27 36 36 19 2 50
Front left
4.56m 28 27 36 36 19 2 51
Rear right
4.61m 28 27 37 37 19 2 51
Rear left
4.64m 28 28 37 37 20 2 51
Bolt torque settings
Bolt Type
Wheel nut U Bolt Class 8.8 Bolt
Class
10.9 Bolt
Bolt Size
M18 M12 M20 M10 M12 M16 M24 M16 M20
Spanner
27 18 30 16 18 24 36 24 30
Ft lb
255 36 191 32 48 140 270 214 300
Nm
345 50 260 44 65 190 370 290 406
[1] When fitting a wheel & tyre to a hub, tighten the wheel
nuts in a star pattern to the correct tension. To achieve this
choose a wheel nut & tighten, then proceed to the opposite
side of the hub to the next wheel nut & tighten & so on until
all wheel nuts are tight. Then repeat the procedure to check
that all nuts are tight. Do not use impact tools to tighten
wheel nuts. For a guide to the correct tension of the wheel
nuts please use the appropriate tension for your size wheel
nuts from the Bolt Torque Settings table.
Torque values are for dry threads and surfaces however, it is
permissible to apply a small amount of anti corrosive oil
to the threads.
Fig 32.