3
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions, operating
manual and sound common sense will guarantee many years of enjoyment using the product.
Kellfri's equipment and products are aimed at self-employed farmers, horse enthusiasts and other
country-dwellers who have stringent performance demands.
PRODUCT INFORMATION
• For 18-25 hp tractors
• 20 hammer flails
• Adjustable support roller
• Adjustable skids on sides
• Chain protection against stone chipping
WKM125 flail mower has a working width of 1.25 m, making it practical for flailing, topping or cutting
smaller grasslands and grassed areas. The flail mower has a fine-toothed welded counter bar in the
chassis to break up the grass more effectively.
The cutting height is adjusted by the support roller and skids. The adjustable support roller
guarantees a correct cutting height on uneven ground. The cutting height can be adjusted between
0-55 mm, enabling you to cut the grass close to the ground and thus achieve a more level result. The
grass is evened out and the remnants moulder away faster. The support roller has a scraping iron to
keep the roller free from cut material.
The front of the flail mower is fitted with chain guards that adapt to the substrate and protect both
the tractor and the surroundings from stone chipping and grass spray.
The flail mower is fitted as standard with hammer flails. There are 20 flails in total, ensuring that the
grass is broken up. The flail mower is also adapted for Y-flails, which can be purchased additionally
(not included).
The flail mower is adapted for tractors between 18-25 hp and is connected to the tractor’s power
take-off, giving it an input speed of 540 r/min. This gives a rotor speed of 2295 r/min. The 3-point
linkage can be manually side shift adjusted for lateral adjustment.
The flail mower’s chassis is made of 4 mm thick steel.
The flail mower is supplied with PTO drive shaft and transmission oil as standard.
TECHNICAL DATA
35-WKM125
Length x width x height
1385 x 800 x 790 mm
Working width
1250 mm
Operating height
12 - 55 mm
Weight
239,5 kg
Flails
20 pcs
Required power
18 - 25 hp
Operating speed
6-12 km/h
Typ of oil transmission oil
0,7 L [Transmission oil 80W-90]
PTO RPM
540
PTO shaft
Standard
Sideshift manualy adjusted
100 mm
