23
DANGER!
Ensure that all parts have stopped rotating before carrying out any operation on the machine!
When the PTO is disconnected, the PTO drive shaft stops rotating.
However, this does not mean that all parts of the mower have stopped moving.
Be cautious, and wait a few minutes in order to be sure that all parts have stopped moving.
Mounting of hammer flail onto verge flail mower.
WARNING!
NEVER mount different types of flails on the mower.
When the flails have been mounted, always check the tightness of the flail screws.
Ensure that all screws are fully tightened.
Hammer flails can be replaced with Y-flails
(not included, may be purchased additionally).
Article no. for Y-flail: R35-SK180.003
Spacers R35-VKM175.008
FLAILS
Image shows model 35-WKM105.
