Kellfri 35-VKM195H, Manual

Page: 7 / 24

Table of contents
7
BEFORE USE
Read the safety information and instruction manual carefully. Be sure you understand the
safety measures, instruction manual and warning labels. Use common sense when operating
the machine and use appropriate personal protective equipment.
Always check the performance and the machine combination that are used. It’s highly impor-
tant these matches in a satisfactory manner. This is to ensure the product or the function and
most important yours and others safety. Do visual inspection of equipment or product before
each use. Fix or replace damaged or worn parts immediately to reduce the risk of injury. Lubri-
cate moving parts and check that all screw-nuts and bolts are tightened.
Warning!
For safety, this product should only be used in the manner described in this man-
ual. The user is responsible for the instruction to be read through and followed.
Learn and remember the correct working methods. Beginners should always keep a low speed,
use extreme caution before routine and product knowledge is achieved. The user/customer is
responsible to handle the situation correctly. The product should not be taken into use unless
it can be done in a safe way for the user.
Read the tractor’s manual before connecting machine.
WORKSTATION
The driver must remain in the driver’s seat during the entire operation. If the operator need
to leave the tractor, the PTO must be disengaged, the tractor engine shut off and the parking
handbrake must be applied.
Warning!
NEVER RUN THE HYDRAULICS WHEN THE TRACTOR IS TURNED OFF.
What to consider when operating a machine with the PTO shaft
The transmission gearbox is protected by both the drive shaft and the shear bolt. All guards
should be effective and in good condition. If machine guards condition is poor or worn, the
guards should be replaced before the implement is used.
DANGER!
If the PTO shaft is not properly protected, this can cause death because it can catch
parts of the body or clothing and cause life-threatening injuries.
Make sure the safety chain is properly anchored to the PTO-shaft and that the PTO shaft is pro-
tected over its entire length. Ensure that PTO shaft spins easily inside the protective tube. Hold
the spline groove clean and well lubricated so that the drive shaft can be connected easily.
Read PTO shaft manual adjustment and use of PTO shaft.