background image

Table of contents

8

RISKS AND HAZARDS WHEN USING A MOWING MACHINE

Risk of crushing

Bystanders may be injured when the machine is lowered to the cutting position. The machine 

has crushing points around the hinge areas and between the three-point hitch mount and the 

main body.

Rotating blades

All persons will be at risk of injury if they stick out their hands or feet under the machine when 

it is lifted from the ground and the blades are rotating.

Risk of pinching or risk of trapping body parts

This risk is common in transmission devices such as belt drives, gears and rollers. Ensure that 

all guards are fitted correctly.

WARNING!

Never use a tool or product with defective safety equipment.

Risk during disengaging of the machine

The heavier the rotating part is, the longer it will continue to rotate after the drive has been 

switched off. This feature is called ”free-wheeling” . Rotating blades and other components, 

such as drive shafts, etc. will continue to spin after the drive has been disconnected. Damages:

* When the operator releases the equipment, and try to clean or adjust the machine before the 

components have stopped rotating.

* When the shear bolt in the protective device in the power take off breaks and rotors still spins 

while the PTO has stopped. Operator’s awareness is the key to safety around rotating parts. Do 

not raise the machine while the blades are rotating.

Risk of ejecting objects

Machines that mows throws out material while driving. Foreign objects such as rocks, sticks 

and other debris can get into the machine and ejected with tremendous speed. Cover the 

sides and the front prevents these objects to be thrown out but it does not always guarantee 

that the guards catch everything  that is thrown out.

Bystanders or animals that stand in the way of the projected object can be seriously damaged. 

Never allow any bystanders within the vicinity of the machine. Respect the machine’s danger 

zone. 

Danger

 

zone 15m!

Noise

Please note that the machine is made to be used outdoors and that the position of the 

operator is in the driving seat of the tractor. It is advisable to read the regulations specified in 

the tractor manual and maintenance instructions.

The sound pressure level exceeds 70 dB during operation. Hearing protection should be used 

while driving.

Summary of Contents for 35-VKM195H

























Reviews: