Keller 1110968 Operating Instructions Manual Download Page 5

5

EN

Operating instructions CellaTemp PR xx

1.4  Copyright

This Operating Manual should be treated as confidential� It is solely intended 

for use by persons involved with the instrument� This manual may not be made 

available to a third party without prior Manufacturer’s consent� Please contact the 

Manufacturer if the need should arise�

2  Safety

This chapter outlines all important safety aspects to be considered for optimum 

employee protection and to ensure safe and reliable operations�

2.1  Intended use

The pyrometer is solely intended for use as described in this manual� Operational 

safety can only be ensured when the instrument is used for its intended purpose�

The use of the pyrometer for any other purpose beyond what is specified 

in this manual is prohibited� Using the instrument in any other manner will 

be considered as improper� 
The manufacturer is only liable for damage that occurs during correct use� 

The prerequisite for any liability, however, is that the cause of the damage 

is due to a defective product and the defect in the product was caused by 

the manufacturer�

2.2  User’s responsibility

The pyrometer may only be used when it is in perfect working condition�

2.3  Safety requirements

The instrument operates at low voltage (18 – 34 V DC)�  The power supply unit 

must conform to directive EN50178, SELV, PELV�

Summary of Contents for 1110968































Reviews: