4. Operating
KENOVA set line V9xx(-S)
© Kelch GmbH 2014
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · [email protected]
Page 22
4 Operating
4.1 General remarks on operating the electronic measuring equip-
ment
- The electronic equipment is completely wired up
- Any connectors for the peripherals are located at the rear
- The electronic measurement equipment is fitted with interference suppres-
sion filters
- Measurement cables and other connectors are labelled precisely
- Do not install the tool setter in the immediate vicinity of:
o
Spark erosion machines
o
Electric welding systems
o
Cable contactors and circuit breakers
o
Electrostatic painting systems and similar facilities
4.2 Components
1. Operating panel with touch screen
6. Screen for measurement control unit
2. Main switch
7. Cooling system
(only with V9xx-S)
3. Switch cabinet
8. Take-up spindle
4. Camera carrier with one-hand operation 9. Storage tray for spindle inserts
5. Drawer for storage
10. Shrink tower
(only with V9xx-S)
Figure 8: Components KENOVA set line V9xx(-S)
1
2
3
4
8
9
5
6
10
Summary of Contents for KENOVA set line V9 Series
Page 2: ......
