KELCH KENOVA set line V9 Series, Operating Instructions Manual

Page: 19 / 38

2. Safety
KENOVA set line V9xx(-S)
© Kelch GmbH 2014
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
Page 13
2.8 Danger from electrical power /voltage
Warning! Indirect danger to life if the appliance is incorrectly handled!

The appliance may not be operated if the housing is open.

The appliance housing must only be opened by specialists from
KELCH GmbH
!

The appliance must not be operated in a potentially explosive environment.

The appliance may not be exposed to condensation or liquids.

The device must be switched off immediately when damage such as the following
occurs;
- loose cable connections,
- defective insulation,
- burnt cables,
- other damage that impairs the safety of the device.

Pull out the main connector of the tool setting device / cooling unit (only with the
V9xx-S) before performing any maintenance, cleaning or repair work!

Electric shock still possible when the device is switched off. Wait for five minutes
after switching off on all poles (capacitor charge!) before touching the equipment.

Only operate again after all damage has been rectified.

Electrical connection of the appliance to the mains supply, as well as carrying out
tasks on the electrical equipment, must only be carried out by a qualified special-
ist. Thereby, observe the corresponding VDE guidelines and guidelines and
regulations applicable at the location of installation.