KELCH KENOVA set line V9 Series, Operating Instructions Manual

Page: 17 / 38

2. Safety
KENOVA set line V9xx(-S)
© Kelch GmbH 2014
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
Page 11
2.7 Dangerous areas on the appliance and during operation
Item Dangerous area Hazard Safety instructions
1 Tool Cuts Wear gloves
2 Take-up spindle
Crushing,
danger of being
drawn in
Avoid getting fingers jammed when insert-
ing and loosening the tool! Wear clean
gloves. No loose objects such as neck-
laces or other hanging jewellery may be
worn as they can become jammed and
draw the operator into the machine.
3
Induction coil
(only with
V9xx-S)
Electro-
magnetic
radiation
Do not permit persons with active (e.g.
pacemaker) and, in certain cases, also
passive medical implants, to work on this
appliance, or allow interference-sensitive
appliances to be exposed to the electro-
magnetic field of the system. For safety
reasons, these persons must not go
nearer than 3 m to the appliance.
4
Induction coil
(only with
V9xx-S)
Vapours
harmful to
health
During shrinking, residual cooling lubri-
cants, oils or greases can vaporise or
create dust. These vapours can contain
carcinogenic substances and are harmful
to heath. Therefore keep a safe distance
and do not inhale these!
5
Shrink chuck
(only with
V9xx-S)
Burns Wear thermally insulating gloves
6
Cooling unit,
motor housing,
refrigerant
pressure lines
(only with
V9xx-S)
Burns
Continuous operation can give rise to high
temperatures on the motor housing and
the refrigerant pressure lines. So always
wear protective gloves when filling the
unit.