KEKAI ALABAMA, Manual

Page: 35 / 98

2. Unplug the power cord from the outlet.
3. Inspect the fireplace to make sure no vents are blocked,
or clogged with dust or lint. If they are, use a vacuum to
clean the vent areas.
4. With the POWER switch in the OFF position, plug the
power cord back into the outlet.
5. If the problem continues, have your outlet and wiring
inspected by a professional.
Remote Control Battery Information
Small remote control uses one CR2025 battery(included)
REPLACING THE REMOTE CONTROL BATTERY
When the remote control stops operating or its range seems reduced, it is
time to replace the battery with a new one.
1. The battery compartment is located on the back end of the remote.
2. Press and slide the battery door open and remove the old battery.
3. Insert a CR2025 battery, checking that the “+” and “-“terminals of the
battery matches the inside of the battery compartment.
4. Replace the battery compartment door.
DO NOT mix old and new batteries.
DO NOT use rechargeable silver oxide cell batteries with remote control unit.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargeable
(Nickel-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to
leak or explode.