CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
7.Do not use outdoors.
8.Do not use this heater in the immediate surroundings of a bath, a shower or
a swimming pool
9.The heater must not be located immediately below a socket-outlet. Do not
run the cord under carpeting. Do not cover cord with throw rugs, runners, or
the like. Arrange cord away from traffic area and where it will not be tripped
over.
10.To disconnect the unit, turn the controls off, then remove the plug from the
outlet.
11.Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage to the
heater.
12.To prevent a possible fire, do not block air intake or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may
become blocked.
13.All electrical heaters have hot and arching or sparking parts inside. Do not
use in areas where gasoline, paint, or flammable liquids are used or stored
or where the unit will be exposed to flammable vapors.
14.Do not modify the electric fireplace. Use it only as described in this
manual. Any other use not recommended by the manufacturer may cause
fire, electric shock or injury to persons.
15.To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. Do
not change the plug in any way. Avoid the use of an extension cord.
Extension cords may overheat and cause a risk of fire.
16.Do not burn wood or other materials in the electric fireplace.
17.Do not strike the clear door panel.
18.Always use a certified electrician should new circuits or outlets be required.
19.Always use properly grounded, fused and polarized outlets.
20.Disconnect all power supply before performing any cleaning, maintenance
or relocation of the unit.
2
Summary of Contents for ALABAMA
Page 23: ...PARTS HARDWARE SPECIFICATION AND DIMENSION PRODUCT DIMENSIONS ...
Page 29: ......
Page 37: ......
