22
Quick Results Guide
Remote command programming
The SCPI commands for speed, digits, filter, and rel are listed in Table 12. The commands for
ranging are listed in Tables 6 and 7.
Table 12
SCPI commands; speed, digits, filter, and rel
Command Description
Speed commands
1
:
[:SENSe]:CURRent:NPLCycles <n>
Set measurement speed; <n> = 0.01 to 10.
[:SENSe]:VOLTage:NPLCycles <n>
Set measurement speed; <n> = 0.01 to 10.
[:SENSe]:RESistance:NPLCycles <n>
Set measurement speed; <n> = 0.01 to 10.
Digits command:
:DISPlay:DIGits <n>
Set display resolution; <n> = 4, 5, 6, or 7.
Filter commands:
[:SENSe]:AVERage:TCONtrol <name> Select filter type; <name> = REPeat or MOVing.
[:SENSe]:AVERage:COUNt <n>
Set filter count; <n> = 1 to 100.
[:SENSe]:AVERage <b>
Enable/disable filter; <b> = ON or OFF.
Rel command
2
:
:CALCulate2:NULL:STATe <b>
Enable/disable rel; <b> = ON or OFF.
1. The speed setting is global for all functions. Therefore, you can use any of the three commands to set speed.
2. The commands to acquire a rel value are not listed in this table (see Section 8, Relative in the 2400 Series
SourceMeter User’s Manual).
