8
7.
Press Enter to set the current.
8.
Press CH2.
9.
Press V-‐Set.
10.
Use the arrow keys, numeric keypad, or the navigation wheel to enter the desired voltage
output value, or 9V in this example.
11.
Press Enter to set the voltage.
12.
Press I-‐Set.
13.
Use the arrow keys, numeric keypad, or the navigation wheel to enter a current limit.
14.
Press Enter to set the current.
15.
Press CH3.
16.
Press V-‐Set.
17.
Use the arrow keys, numeric keypad, or the navigation wheel to enter the desired voltage
output value, or 5V in this example.
18.
Press Enter to set the voltage.
19.
Press I-‐Set.
20.
Use the arrow keys, numeric keypad, or the navigation wheel to enter a current limit.
21.
Press Enter to set the current.
STEP 2 Enabling Channel 1
22.
Press Menu.
23.
Use the arrow keys, or the navigation wheel to select
Enable Channels
.
24.
Press Enter to enter the submenu.
25.
Use the arrow keys, or the navigation wheel to select
Enable/Disable CH1
.
26.
Press Enter to enter the submenu.
27.
Use the arrow keys, or the navigation wheel to select
Enable CH1
(default).
28.
Press Enter to enable channel 1.
29.
Press Esc a couple of times to return to the main display.
STEP 3 Turning on the Output
30.
Press Output On/Off.
STEP 4 Enabling Channel 2
31.
Press Menu.
32.
Use the arrow keys, or the navigation wheel to select
Enable Channels
.
33.
Press Enter to enter the submenu.
34.
Use the arrow keys, or the navigation wheel to select
Enable/Disable CH2
.
35.
Press Enter to enter the submenu.
36.
Use the arrow keys or the navigation wheel to select
Enable CH2
(default).
37.
Press Enter to enable channel 2 and output channel 2’s configured voltage.
38.
Press Esc a couple of times to return to the main display.
STEP 5 Enabling Channel 3
39.
Press Menu.
40.
Use the arrow keys, or the navigation wheel to select
Enable Channels
.
41.
Press Enter to enter the submenu.
42.
Use the arrow keys, or the navigation wheel to select
Enable/Disable CH3
.
43.
Press Enter to enter the submenu.
44.
Use the arrow keys, or the navigation wheel to select
Enable CH3
(default).
