Important Safety Instructions
2-1
2
Installation
This section describes how to install and configure the software and
hardware. Before you begin, however, read the safety instructions in the
next section.
Important Safety Instructions
PIO-HV boards are prominently labeled to warn of shock hazard. Before
you install your PIO-HV board, perform the following steps:
1. Read the warnings in this section.
2. When installing, cabling, and wiring your board, pay close attention
to the warnings on the board labels.
3. When using the board, do not exceed the ratings specified in
Appendix A.
Warning
: Because you can connect the outputs of a PIO-HV board to
high voltage, you can turn some areas of the board surface into a shock
hazard. A shock hazard can exist on those board areas even when your
computer is powered off. To protect you from exposure to areas of shock
hazard, Keithley furnishes a PIO-HV board only with a fully installed
protective cover. While you can remove the cover to service a board,
you
must never use the board with its cover removed!
In addition, you
must disconnect all cables and wiring before servicing this board.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
