![background image](http://html1.mh-extra.com/html/keithley/kpci-pio32ioa/kpci-pio32ioa_user-manual_3961187054.webp)
Keithley Instruments, Inc.
Cleveland, Ohio 44139
DRN.
CKD.
APP.
DATE
DATE
DATE
PART NUMBER
LTR
REVISIONS
APP. DATE
FORM 28777A-SBG
BRUNING 40-21 62198-SBG
PURCHASED ITEM
SPECIFICATIONS
SPEC-KPCIPIO32IOA
A 26816 Rel SZ 1-15-02
B 26946 Rev SZ 2-22-02
HW 1-15-02
SK
1-15-02
HW 2/27/02
Rev B
Page
2
PARAMETER MIN.
TYP.
MAX.
UNIT
Relay Turn OFF Time
80
200
µ
s
Power Dissipation
Per Channel
430
mW
Isolation
(2)
60
V pk
NON-Isolated external power
(6)
PARAMETER Maxiumum
Capacity
Location
Pin
#
+5 V
DC
PC Bus Sourced
1.0 Amperes
+5V
1 Top & Bot Connector
Digital Ground Return
1.0 Amperes
GND
19 Top & Bot Connector
GENERAL SPECIFICATIONS
POWER REQUIREMENTS:
+5V: 500 mA Maximum
EMC:
Conforms to European Union Directive 89/336/EEC, EN61326-1
SAFETY:
Conforms to European Union Directive 73/23/EEC, EN61010-1
ENVIRONMENTAL:
Operating Temperature:
0 to 50
°
C
Storage Temperature:
-20 to 70
°
C
Humidity (non condensing):
0 to 80% at 35
°
C
DIMENSION:
18.1cm x 10.8cm x 1.9cm (7.1in x 4.25in x 0.75in)
WEIGHT:
KPCI-PIO32IOA – 0.13kg (0.30lbs) KPCI-PDISO8A – 0.12kg (0.26lbs)
ACCESSORIES:
Cables: CAB-1284CC-0.5, CAB-1284CC-2
STP-36: 36-pin Screw Terminal Panel
Notes:
1. Inputs are not guaranteed to be compatible with all TTL/CMOS logic families.
2. Minimum guaranteed isolation, which includes channel to channel, channel to PC and channel to chassis ground.
3. Selectable, jumper switched LPF. Recommended for AC or slow DC inputs.
4. De-rate
3.6
mA/
°
C if ambient temperature is over 25
°
C.
5. Output channel in off-state, T
A
= 50
°
C, 60 V
DC
applied with 30% RH (non-condensing) for maximum and typical values.
6. For convenience only. These are not isolated from the rest of the system. Do not use directly in external circuit if isolation is required.
7. Typical measurement was achieved with an STP-36 and 2 meter cable, CAB-1284CC-2 at 25
°
C.
Summary of Contents for KPCI-PIO32IOA
