Keithley KPCI-PIO32IOA, User Manual

Page: 24 / 72

3-8 Installation KPCI-PIO32IOA and KPCI-PDISO8A User’s Manual
Connecting the KPCI-PIO32IOA and KPCI-PDISO8A boards
This subsection helps you to do the following:
•
Identify pin assignments on the board.
•
Connect interface accessories.
•
Wire the KPCI-PIO32IOA or KPCI-PDISO8A I/O to your external circuits.
Identifying I/O connector pin assignments
The KPCI-PIO32IOA board has two 36-pin mini-D type I/O connectors for I/O, while the
KPCI-PDISO8A board has one 36-pin mini-D type I/O connector for I/O.
Figure 3-1 shows the
configuration of the KPCI-PIO32IOA board, and Figure 3-2 shows the KPCI-PDISO8A board.
Table 3-1 defines connector pin assignments for both boards. Note that those terminals labeled
“IP” are control inputs, while “OP” terminals are switching outputs.
Figure 3-1
KPCI-PIO32IOA board configuration
J101
(Channels 0 through 7)
J102
(Channels 8 through 15)
Low-pass
Filter Jumpers