Keithley DMM7510, Reference Manual

Page: 370 / 1036

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 6: SCPI command reference
DMM7510-901-01 Rev. B / May 2015 6-43
DISPlay subsystem
This subsystem contains commands that control the front-panel display.
:DISPlay:CLEar
This command clears the text from the front-panel USER swipe screen.
Type Affected by Where saved Default value
Command only Not applicable Not applicable Not applicable
Usage
:DISPlay:CLEar
Example
DISP:CLE
DISP:SCR SWIPE_USER
DISP:USER1:TEXT "Batch A122"
DISP:USER2:TEXT "Test running"
Clear the USER swipe screen and switch to
display the USER swipe screen.
Set the first line to read "Batch A122" and
the second line to display "Test running".
Also see
:DISPlay:USER<n>:TEXT[:DATA] (on page 6-47)
:DISPlay:<function>:DIGits
This command determines the number of digits that are displayed for measurements on the front panel.
Type Affected by Where saved Default value
Command and query Recall settings
Instrument reset
Power cycle
Measure configuration list Save settings
Measure configuration list See Functions and defaults
Usage
:DISPlay:<function>:DIGits <n>
:DISPlay:<function>:DIGits DEFault
:DISPlay:<function>:DIGits MINimum
:DISPlay:<function>:DIGits MAXimum
:DISPlay:<function>:DIGits?
:DISPlay:<function>:DIGits? DEFault
:DISPlay:<function>:DIGits? MINimum
:DISPlay:<function>:DIGits? MAXimum
<function> The function to which the setting applies; see Functions
<n> 3.5 digit resolution:
3
4.5 digit resolution:
4
5.5 digit resolution:
5
6.5 digit resolution:
6
7.5 digit resolution:
7
(not available for digitize functions)