![background image](http://html1.mh-extra.com/html/keithley/das-1800hr-series/das-1800hr-series_user-manual_661619067.webp)
4-6
Cabling and Wiring
Attaching SSH-8 Accessories
DAS-1800ST Series boards can accept one or two SSH-8 accessories.
(The DAS-1802HR does not support SSH-8 accessories). The SSH-8 is a
simultaneous-sample-and-hold accessory whose functions and
capabilities are described in the
SSH-8 User’s Guide
. This accessory can
serve as a front-end analog interface for DAS-1800ST Series boards when
connected through an STA-1800U. Note that attached SSH-8 accessories
must be set as slaves. Attach an SSH-8 to a STA-1800U using a C-1800
cable, as shown in Figure 4-7. Refer to the
SSH-8 User’s Guide
for more
information.
Figure 4-7. Attaching an SSH-8 to a DAS-1800ST Series Board
through an STA-1800U
STA-1800U Accessory
SSH-8
Accessory
C-1800 Cable
J1
J3
P1
DAS-1800ST Series
Board
CDAS-2000
or
CDAS-2000/S
Cable
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com