![background image](http://html1.mh-extra.com/html/keithley/das-1800hc-series/das-1800hc-series_user-manual_3961491044.webp)
3-2
Setup and Installation
5. When satisfied with the inspection, proceed with the software and
hardware setup instructions.
Note:
DAS-1800HC Series boards are factory calibrated and require no
further adjustment prior to installation. If at a later time you decide to
re-calibrate the board, refer to Section 6 for instructions.
Installing the Software
Caution:
To prevent a system crash the first time you install and test any
new hardware, exit all other programs. If you are using a disk cache,
disable write caching. If the system does crash and you are using disk
compression software or a disk cache utility, run the utility that checks the
directory structures.
Installing the DAS-1800HC Series Standard Software Package
Important:
Before you begin installing any hardware or software for the
DAS-1800HC, read the
DriverLINX Installation and Configuration
Guide
and the
Appendix F: Configuration and Implementation Notes—for
Keithley DAS-1800
manuals that are packaged with the DriverLINX
software. They are accessed from the DriverLINX CD-ROM after you
have installed Adobe Acrobat.
Before Installing DriverLINX
1. Inventory your DAS-1800HC board’s configuration settings.
2. Determine the resources your DAS-1800HC Series board requires.
3. Inventory your computer’s resources already allocated to other
installed devices.
4. Determine whether your computer has sufficient resources for your
DAS-1800HC board.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com