X-2
Index
C
C/C++
function libraries for programming in 1-2
cable
C-16MB1 1-4, 4-8
C-1800 1-4, 4-7
CAB-1800 Series 1-4, 4-4, 4-6, 4-9
red wire marker 4-4
calibration
DriverLINX utility 6-2
calibration utility 6-1
cascaded counters, 82C54 2-11
CD ROM
DriverLINX installation 3-3
channel lists 2-5
channel-gain queue 2-4
CJC circuit 4-1, 4-5
clock
external 2-15
function in DriverLINX C-4
pacer 2-9, 2-11
clock source
external 2-11, 2-13
internal 2-11, 2-13
software 2-11
Commonly used I/O addresses 3-7
common-mode reference
setting in DriverLINX C-4
common-mode voltage 4-14
computer
requirements for DAS-1800 and
DriverLINX 1-1
computer resources
determination for installation 3-2
configuration
in DriverLINX C-1
CONN-1800HC accessory 1-4, 4-6, 4-7, 4-8
connecting
analog output signals 4-15
CJC circuit 4-5
CONN-1800HC 4-6
differential input 4-12
digital control signal
DOSTB 4-16
SSHO 4-15
TGIN 4-15
TGOUT 4-15
XPCLK 4-16
digital control signals 4-15
digital I/O signals 4-15
MB01 backplane 4-8
multiple boards 4-16
precautions 4-10
single-ended input 4-12
STA-1800HC 4-1
STP-100 4-9
connector pin assignments 4-2, 4-3, B-1
conversion rate 2-9, 2-12
counter/timer initialization
programming in DriverLINX C-23
counter/timer interrupt
programming in DriverLINX C-23
counter/timer subsystem
programming in DriverLINX C-23
D
D/A conversion delay
output programming in DriverLINX
C-20
D/A data lost
output monitoring in DriverLINX C-21
D/A volts
DriverLINX suppport for C-3
DACs (digital-to-analog converters) 2-17
DAS-1800 board models
DriverLINX support for C-2
data acquisition modes
supported in DriverLINX C-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
