Model 8011 Connection Instructions
2
PA-1032 Rev. A / April 2011
Power and environmental specifications
For indoor use only.
Specification
Value
Voltage limit
40 V DC maximum
Current limit
15 A DC maximum
Unpack and inspect the High Current Test Socket Kit
To unpack and inspect the High Current Test Socket Kit:
1. Inspect the box for damage.
2. Open the top of the box.
3. Remove the bags that contain the boards and accessories.
4. Carefully lift the High Current Test Socket Kit out of the box.
5. Inspect the materials for any obvious signs of physical damage. Report any damage to the shipping agent
immediately.
You should have received:
•
TO-247 Device Test Board (8010-120; to re-order, use Keithley Model number 8010-DTB)
•
Customizable Test Board (8010-130; to re-order, use Keithley Model number 8010-CTB)
•
PA-1032 Model 8011 High Current Test Socket Kit Connection Instructions (this document)
•
Four nylon hex standoffs with inserts on each end (ST-272-1)
•
Four Phillips flat-head screws (#6-32 x 3/8)
•
Two 8 in. (203.2 mm) stackable banana cables — one black (CA-560-0), one red (CA-560-2)
•
One mounting plate (8011-301)
•
Two 8-pin female plug connectors with screw terminal connections (CS-1629-8)
•
Four 9 in. (228.6 mm) black cables with one stackable banana plug and one unterminated end (CA-567-0)
•
Four 9 in. (228.6 mm) red cables with one stackable banana plug and one unterminated end (CA-567-2)
•
One 120 in. (304.6 cm) green/yellow ground cable with lugs (CA-568-120)
•
One #6-32 Keps
®
washer nut
•
Two insulator plugs (quantity includes a spare plug) (8010-317)
•
Two screw terminal connector kits (2600-KIT)