![background image](http://html1.mh-extra.com/html/keithley/7012-c/7012-c_instruction-manual_661983057.webp)
4-11
DC parameter checks
With a transistor con
Þ
gured as a common-emitter am-
pli
Þ
er, the test system shown in Figure 4-8 can be used
to determine the following DC parameters: Collector
current (I
C
), base current (I
B
), current gain, emitter cur-
rent (I
E
) and base-to-emitter voltage (V
BE
).
Figure 4-8 shows which crosspoints to close to con
Þ
g-
ure the ampli
Þ
er circuit. SMU #1 is con
Þ
gured to
source voltage and measure current. It is used to power
the collector circuit (V
CE
) and measure the collector
current (I
C
). SMU #2 is con
Þ
gured to source current
and measure voltage. It is used to provide the base cur-
rent (I
B
) for the transistor, and will also measure the
base-to-emitter voltage (V
BE
). With collector current
(I
C
) and base current (I
B
) known, the current gain can
be calculated as follows:
The emitter current (I
E
) can be determined by using
Kirchoff’s Current Law as follows:
Gain
I
C
I
B
-----
=
I
E
I
C
I
B
+
=
Common-emitter characteristic curves
A pro
Þ
le of the transistor operating characteristics can
be obtained by measuring the collector current over a
speci
Þ
ed voltage range (V
CE
) for different base bias
currents (I
B
). For example, Figure 4-9 shows the charac-
teristics of a typical NPN silicon transistor at base bias
currents (I
B
) of 20
µ
A, 40
µ
A, 60
µ
A, and 80
µ
A.
Extensive trigger capabilities facilitate synchronization
of the Keithley Source Measure Unit operations. By
performing a subordinate sweep, SMU #1 will perform
a staircase sweep at every base bias current level set by
SMU #2. On every step of each staircase sweep, SMU
#1 will source a voltage level (V
CE
) and measure the
subsequent collector current (I
C
). For the characteris-
tics shown in Figure 4-9, four staircase sweeps were
performed; one staircase sweep at each base bias level.
Refer to a Keithley Source Measure Unit instruction
manual for details on performing sweeps.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Summary of Contents for 7012-C
