3-14
Remote Operation
Model 6517A Getting Started Manual
V-Source
:SOURce
SOURce
Subsystem
:VOLTage <n>
Specify V-Source level (0 to ±1000V).
:RANGe <n>
Select range;
≤
100 = 100V range, >100 = 1000V
range.
:LIMit
Path for voltage limit:
[:AMPLitude] <n>
Specify voltage limit; 0 to 1000 (V).
:STATe <b>
Enable or disable limit.
:MCONnect <b>
Enable or disable V-Source LO to ammeter LO
connection.
:CURRent
Path for current limit:
:RLIMit
Path to control resistive current limit:
:STATe <b>
Enable or disable resistive I-limit.
:LIMit <b>
Path to check current compliance:
[STATe]? <b>
Query state of current compliance.
Data store (Buffer)
:TRACe
TRACe
Subsystem
:ELEMents <name>
Select reading elements :TSTamp, HUMidity,
CHANnel, ETEMperature, VSOurce, NONE.
:POINts <n>
Specify buffer size.
:FEED
Path to control buffer:
:CONTrol <name>
Select control mode and enable buffer:
NEVer
,
NEXT
,
ALWays
, or
PRETrigger
.
:DATA?
Read all readings in buffer.
NOTE
See User’s Manual to use
:PRETrigger
.
Open/close channels and scan
:ROUTe
ROUTe
Subsystem
:CLOSe <list>
Close specified channel.
:STATe?
Query the closed channel.
:OPEN <list>
Open specified channel.
:OPEN:ALL
Open all channels.
:SCAN
Path to control scanning:
[:INTernal] <list>
Specify internal scan list: 2 to 10 chans.
:EXT
ernal <list>
Specify external scan list: 1 to 400 chans.
:SMEThod <name>
Specify settling time for internal card; 0 to
99999.9999 (sec.).
:LSELect <name>
Enable the specified scan:
INTernal
,
EXTernal
or
NONE
.
Summary of Contents for 6517A
Page 12: ...1 FrontPanelOperation...
Page 36: ...2 MeasurementOptions...
Page 67: ...3 RemoteOperation...
Page 96: ...4 SpecsandAccessories...