Model 4299-2 Instructions
PA-909 Rev. C / May 2007
7
Step 4. Install Instruments
NOTE
Although the following step may be completed by one person, two are recommended.
When rack mounting restricts access to the main power cord, provide a separate main power
disconnect device. This device must be located in close proximity to the equipment and within
easy reach of the operator.
1. Slide units into rack by aligning both
Rear Rack Mount Brackets
(2602-334)
with the associated
Rack
Mount Extension Arms
(2602-335) (refer to Figure 5).
2. While still supporting the units, secure them to the front rack rails with four
Truss Head Screws
(10-
32x5/8PHTRSH).
Figure 5
Install instruments
Rack Mount
Extension Arm
(2602-335)
(2 places)
Truss Head
Screw (Phillips)
10-32x5/8PHTRSH
(4 Places)
Rear Rack
Mount Bracket
(2602-334)
(2 places)
Front Rack
Rail (2 places)
