Series 3700A System Switch/Multimeter Reference Manual
Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018
11-373
slot[slot].thermal.state
This attribute indicates the thermal state of the card in the specified slot.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
value
= slot[
slot
].thermal.state
value
0 if thermal conditions will not affect specifications
1 if thermal conditions are getting warm enough to affect specifications
slot
Slot number (1 to 6)
Details
This attribute is only available for a slot if a card is installed and if the installed card supports thermal
state detection. If thermal state detection is not available, the return value is
nil
.
Example
print(slot[3].thermal.state)
Query the thermal state on slot 3. If
specifications might be affected by the
thermal state, the output is:
1.00000
Also see
status.condition
This attribute stores the status byte condition register.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not saved
Not applicable
Usage
statusByte
= status.condition
statusByte
The status byte; a zero (0) indicates no bits set; other values indicate various bit
settings
Details
This attribute is used to read the status byte, which is returned as a numeric value. The binary
equivalent of the value of this attribute indicates which register bits are set. In the binary equivalent,
the least significant bit is bit B0, and the most significant bit is bit B7. For example, if a value of
1.02
(which is 129) is read as the value of this register, the binary equivalent is 1000 0001.
This value indicates that bit B0 and bit B7 are set.