Section 2: Using the front-panel interface
Model 2651A High Power System SourceMeter® Instrument User's Manual
2-4
2651A-900-01 Rev. A / March 2011
To change a value using the navigation wheel
:
1. Turn the navigation wheel to go to the character you want to change (the character blinks
when selected).
2. Press the navigation wheel to edit that character.
3. Turn the navigation wheel to change the value.
4. Press the navigation wheel to enter the change.
5. Repeat these steps as needed to change the value.
6. Press
the
ENTER
key or the navigation wheel
when finished changing all the characters.
To change a value using the numeric keypad:
NOTE
The numeric entry method may only be used if the numeric keypad is enabled.
1. If the keypad is disabled, press the
MENU
key, then select
DISPLAY > NUMPAD > ENABLE
.
2. Use
the
CURSOR
arrow keys to move the cursor to the value that you want to edit.
3. Press any of the desired number keys (0-9, +/-, 0000). The cursor moves to the next value on
the right.
4. Repeat the above steps as required to set the desired values.
5. Press
the
ENTER
key to select the value or press the
EXIT (LOCAL)
key to cancel the change.
6. (Optional) Press the
EXIT (LOCAL)
key to return to the main menu.
