manualshive.com logo in svg

Keithley 2182, Quick Reference Manual, Page: 23 / 30

Share
Download
Keithley 2182 Quick Reference Manual Download Page 23

Quick Reference Guide

17

Setting limit values

To enter high and low limit values, press the Limits VALUE key to view the present HI1 
limit value. Use the cursor and RANGE keys to display the desired value, then press 
ENTER. Repeat the process to set LO1, HI2, and LO2 values. 

Enabling limits

Press the Limits ON/OFF key to view the present beeper status, then change as necessary. 
Press ENTER to return to the normal display. The HI/IN/LO status is displayed along with 
the reading. To disable Limits, press the ON/OFF key. 

Remote limits programming

SCPI commands

SCPI commands for basic limit testing are listed in Table 9

.

Table 9

Limit testing SCPI commands

Command

Description

:CALCulate3:LIMit:STATe <b>

Enable/disable Limit 1 test: <b> = ON or OFF. 

:CALCulate3:LIMit:LOWer <n>

Set lower limit for Limit 1: <n> = limit; -100e6 to 100e6. 

:CALCulate3:LIMit:UPPer <n>

Set upper limit for Limit 1: <n> = limit; -100e6 to 100e6. 

:CALCulate3:LIMit:FAIL?

Query Limit 1 test result (0 = pass, 1 = fail).

:CALCulate3:LIMit:CLEar[:IMMediate]

Clear Limit 1 fail indication.

:CALCulate3:LIMit:CLEar:AUTO <b>

Enable/disable Limit 1 auto clear.

:CALCulate3:LIMit2:STATe <b>

Enable/disable Limit 2 test: <b> = ON or OFF. 

:CALCulate3:LIMit2:LOWer <n>

Set lower limit for Limit 2: <n> = limit; -100e6 to 100e6. 

:CALCulate3:LIMit2:UPPer <n>

Set upper limit for Limit 2: <n> = limit; -100e6 to 100e6. 

:CALCulate3:LIMit2:FAIL?

Query Limit 2 test result (0 = pass, 1 = fail).

:CALCulate3:LIMit2:CLEar[:IMMediate]

Clear Limit 2 fail indication.

:CALCulate3:LIMit2:CLEar:AUTO <b>

Enable/disable Limit 2 auto clear.

Summary of Contents for 2182































Reviews:

No comments