background image

OPERATION MANUAL

PERFORMANCE TRAINER

06

TRAINING SPACE

EQUIPMENT SPECIFICATIONS

Height: 87 inches (2,210 mm)

from floor at suggested installation height

Length: 12 inches (305 mm)
Width: 24 inches (610 mm)
Weight: 120 lbs (54 kg)
Resistance Range: 0 to 75 lbs (0 to 34 kg)
Cable Length: 96 inches 

(2,438 mm)

from start to full extension, without Cable Accessory

Figure 2. Performance Trainer Training Space 

87 inches

 

(2,210 mm)

Cable Length: 96 inches

 

(2,438 mm)

Training Space

12 inches 

(305 mm)

24 inches 

(610 mm)

Figure 3. Cable Max Limit Illustration

Cable Max Limit

Marker

Cable

Cable Accessory

Cable Length: 96 inches (2,438 mm)

Refer to Figure 2 for the Training Space required. 
Plan  Training  Space  accordingly  to  allow  for  full-

range operation. When Performance Trainers are 

mounted adjacent to each other, the Training Space 
may be shared. Actual Cable Length may vary, based 

on Accessory type, user height, and the position of 
the Vertical Adjustment.

To safely and effectively use your Training Space, remember to:

1. 

Clear your Training Space: 

Ensure there is enough space for safe access and operation of the equipment.

2. 

Mark your C

able Max Limit: 

Secure your Cable Accessory to the Cable. Walk your Cable Accessory out until the stop is 

reached. This is your Cable Max Limit. Place a marker on the floor (i.e. tape, keys, or a water bottle) to indicate your Cable 
Max Limit (see Figure 3).

WARNING: AVOID SERIOUS INJURY OR PROPERTY DAMAGE. Do not attempt to extend the Cable beyond the Cable 

Max Limit. Failure to follow this warning will cause the Cable to hit a hard stop, creating a sudden dynamic load that may 
result in serious injury or equipment and property damage.

Summary of Contents for INFINITY 3010XP

















Reviews: