KEEWAY ARN125, Service And Maintenance Manual

Page: 73 / 85

73
1
． ． ． ．
I n s p e c t i o n b e f o r e d e l i v e r y
It is very important for each vehicle do thorough inspection before delivey. Please do the following
procedures and send main informations to dealer.
1. Wash vehicle body with warm scour and brush, and then rinse it with compressed air. Wash paint with
water, and then wipe it with flix or soft cloth (never with soap, bleaching powder or super-high
pressure air).
2. Inspect the light of paint, glaze paint if necessary.
3. Inspect the degree of tightness of exposed bolt and nut, including bolts for carburetor, cylinder head
cover and engine etc.
4. Warm up engine, and then inspect engine oil, add some oil if necessary.
5. Inspect air pressure of tire, and correct it if necessary.
6. Install battery.
7. Inspect the clearance of spark plug, and adjust it if necessary.
8. Inspect whole electrical system, the capability of control switch.
9. Inspect throttle cable and rear brake cable.
10. Inspect and adjust idle speed if necessary.
11. Inspect if disc brake system and rear brake rocker arm is reliable, and adjust them if necessary.
12. Inspect the level of braking liquid in brake cylinder, and add liquid if necessary.
13. Inspect the performance capability of front and rear shock absorber.
14. Inspect if front and rear wheels are on the same line, and inspect if tire turns freely.
15. Try to drive vehicle.
16. Inspect speedmeter and odometer.
17. Inspect if engion oil or fuel leaks out, and add them if necessary.
18. Inspect performance of all locks.
19.
Inspect and adjust headlight.