17" LCD Open frame SAW TM
（
the Water-proof Type
）
User Guide (Rev1.0)
KeeTouch all rights reserved. The information in this document is subject to change without notice
- 8 -
3. Connect one end of the power adapter to the monitor and the other end to the connector of
the power cord.
4. Press the power button on the rear panel to turn the monitor power on.
NOTE
：
：
：
：
The touchmonitor should be integrated according to the above process, if not
may result in the touchmonitor working abnormally
。
2.6 Installing the Driver Software and Calibration
Keetouch TouchSystems provides driver software that allows your touchmonitor to work
with your computer. Drivers are located on the enclosed CD-ROM for the following operating
systems:
• Windows XP
• Windows 2000
• Mac
• Linux
The latest versions of drivers and driver information for other operating systems are
available on the Keetouch TouchSystems web site at www.Keetouchtouch.com.
Your Keetouch touchmonitor is Plug-and-Play compliant. Information on the video
capabilities of your touchmonitor is sent to your video display adapter when Windows starts.
If Windows detects your touchmonitor, follow the instructions on the screen to install a
generic Plug-and-Play monitor.
2.6.1 Installing the Driver Software
double click the file of “Setup.exe” in the folder , the Windows will flip Dialog Box as
follow:
NOTE:Your touchmonitor have dual USB and Serial(RS232) touch interface port,
Depending upon whether you connected the USB communication cable or the
