17" LCD Open frame SAW TM
（
the Water-proof Type
）
User Guide (Rev1.0)
KeeTouch all rights reserved. The information in this document is subject to change without notice
- 5 -
OR
One Power cable US/Canada One European power cable
2.2 Product Overview
Main Unit Rear View
Side View Bottom View
2.3 Attaching the L-Brackets
NOTE: You will need a screwdriver to attach the L-brackets.
To attach the L-brackets:
1 Lay the monitor face down.
2 Place the long end of the L-bracket against the side of touchmonitor. Line up the two
holes of the L-bracket with the two holes of the touchmonitor.
3 Place two M4 screws in the holes and with the screwdriver, screw them in to secure the
bracket.
4 Repeat steps 2 and 3 to attach the other L-bracket to the other side of the touchmonitor.
