12
9. Names of controls and components
R : R E A D Y
L : R E A D Y
When the system is ready to use, the display will read L: Ready or
R: Ready depending on whether the tonometer is in position
to test the left eye or the right eye.
R indicates it is in the right eye position – the display could also read
4. Start/Stop button
Pressing this button while the Pulsair Desktop
is running will stop the pump and put the
system into standby mode, the display will
show Standby. The Start/Stop button will reset the memory buffer,
clearing all readings stored. Pressing this button while the unit is
on standby, the Pulsair Desktop will start with the pump running
and the system is initialised ready for use. The instrument will go
through all the displays as per section 3.
5. Motion sensitive wakeup mechanism
The Pulsair Desktop is equipped with a motion sensor. Upon
moving the platform from left to right or vice versa, the motion
sensitive switch is activated to start the pump and the rest of the
system from Standby mode so that it is ready for measurement
use.
The instrument will go through all the displays as per
section 3. After two minutes of inactivity the system
automatically switches off to save energy.
6. Clear/Demo button
Pressing the Clear/Demo button
momentarily clears all records of
previous readings and the instrument is
set to its default setting. If this button is pressed and held
for more than a second, the instrument initialises and puffs
a demo puff in order to demonstrate to the patient the
softness of the air puff.
C L E A R I N G
D E M O
P U F F
S T A R T I N G
K E E L E R P U L S A I R
O K
Next
Home
Back
