Next
Home
Back
16
10. Measurement procedures
Home
10.1 Preparing the device
1. Plug in the power supply cord to the instrument. The power socket is
located on the right hand side of the instrument.
2. Turn the instrument on using the on/off push switch located on the
front of the instrument. To initialise the instrument ready for use.
3. Remove the protective dust cap from the puff tube.
4. Unscrew the transit lock if secured.
5. Using the joystick bring the moving part of the Pulsair Desktop back
towards you and across to the left (to measure the right eye first).
6. Before using the Pulsair Desktop, press the 'Clear/Demo' button for
1 second to dispel any minute particles of dust or moisture which may
have settled whilst the instrument was not in use.
1
2
4
5
6
3
