HD PTZ Camera User Manual
74
Picture 8-6 Time Setting
Time Setting: Set Device timezone and device time. Click "
Manual Setting
", select
timezone and set time on the popup interface. You can select "Synchronize time with
PC" and click "
Save
" to validate setting.
Auto Time Correction: Select "Auto Timing" and the system will correct time
automatically according to access protocol or NTP server or adaptive. When selecting a
protocol, the system will correct time automatically according to the protocol; when
selecting “NTP server”, you need to fill NTP Server Address and NTP Port and configure
Time Correction Interval; when selecting “Adaptive”, select necessary adaptive protocols,
set the Timing Priority sequence and enter current Timing Protection Time (i.e. the save
time during protocol switching).
Note: Access protocol means the protocol that the camera connects to a platform; NTP
means Network Time Protocol, a protocol for clock synchronization between computer systems.
NTP Clock Synchronization: Select
“Enable” and configure “Server Address”, “NTP Port”
and “Time Correction Interval”. When it is enabled, the camera will correct time on a time
basis of the configured interval.
