HD PTZ Camera User Manual
65
alarm input device is always enabled, which means the circuit is usually loop, user must select
“
Always Enabled
” from the dropdown list of Alarm Type. The default setting is “Always
Disabled
”;
5) Select linkage method to trigger actions when an alarm is triggered;
6) If user sets several alarm inputs, select
“All” under Copy to Alarm to copy all configurations of
current alarm input to other alarm inputs;
7) Duration: there can be maximum 10 durations on one day and each can have a start time and
end time. Please refer to the steps in chapter
Motion Detection
for details;
8) Click
“
Save
” to validate setting.
6.3 Alarm Output
The default duration of alarm output is 5s, and the delay time means the prolonged period of time
after the default 5s. Please select an option from the dropdown list according to actual request and
click “
Save
” to validate setting.
Note: Alarm output is effective only when “Alarm Output” is selected under Linkage Method on
the interface of Alarm Input.
Picture 6-13 Alarm Output
6.4 Abnormality Linkage
Picture 6-14 Abnormality Linkage
