Kedacom IPC2860 Series User Manual Download

Page: 8 / 68

Fisheye Network Camera User Manual

Product Brief

The fisheye network camera is a digital surveillance product that integrates various functions such

as video and audio collection, intelligent coding compression and network transmission. With

embedded operating system and high-performance hardware processing platform, it has high

stability and reliability. The fisheye network camera adopts super wide-angle lens to realize

panoramic monitoring without any blind spots. It is suitable for large outdoor scenes, indoor stadiums

and parking lots, also for boutiques, supermarket chains, offices and etc.

Some features of the fisheye network camera:

Preview Modes

Fisheye network camera supports previewing modes of Soft Decode and Hard Decode;

Fisheye network camera supports multiple mount methods, including wall mount, ceiling mount and

desk mount;

Fisheye network camera supports various display modes, including fisheye, panorama, 180°

panorama and 360° panorama, PTZ and various combinations of them;

Alarm

With audio and alarm ports, realize functions of talkback and alarming;

Motion detection and alarm linkage, make video surveillance intelligent;

Support alarm linkage edition: alarm text overlay, device output, email notification and etc.;

Networking

Support static address, DHCP or PPPoE;

Support NAT traversal, DNS and multicast technology;

Storage

With storage card slot, when the network breaks down, video can be stored in local storage card;

Support local snapshot, default format is .JPG;

Support local recording, user can query and playback recording on PC.

Summary of Contents for IPC2860 Series





































































Search results

Summary of Contents for IPC2860 Series

Reviews:

Related manuals for IPC2860 Series

Brands by name

Popular brands

Kedacom IPC2860 Series, User Manual

Search results

Summary of Contents for IPC2860 Series

Reviews:

Related manuals for IPC2860 Series

Brands by name

Popular brands